Aircraft Does Not Show Up CFS

 
   
When you have installed a new aircraft but it     This is an example of what you would see in note
doesn't "show up" for you, it will usually be one     pad:
of four things that causes this problem:  
      [fltsim]
1. The affected aircraft in not installed in the Main     alias=Bf109\panel
    Aircraft directory.  
2. Next check that Panel files are present. Open     (Bf109 - is the aircraft that the panel is Aliased to.
    the PANEL folder of the aircraft and there has     If you have that aircraft then the panel is fine, but
    to be a panel.cfg and perhaps a file with the     if it is not you will have to either download a new
    extension .bmp. (The bmp will be a picture of     panel or alias it to another aircraft\panel.)
    the panel background, you can open it with  
    Paint.) If there is no other files except panel.cfg 3. Next check that Sound files are present. Open
    then the aircraft would have to be "aliased" or in     the SOUND folder and look for the file
    other words, it would be setup to use the panel     sound.cfg. If there is files with the extension .wav
    of another aircraft. The problem maybe in the     (sound file) then most likely it will be ok. But just
    "aliasing". You have to open the panel.cfg with     like the Panel the sound files can be aliased to
    note pad and check if that aircraft is on your     another aircraft for sound files.
    system.